M.NT68676.2A is a monitor control board, which can support LED/LCD panels. It can support resolution up to 2048X1152. M.NT68676.2A can synchronize with computer automatically. Synchronization requires the synchronous signal which horizontal and vertical sync are separated. M.NT68676.2A can support dynamic contrast control, headphone input and digital volume control simultaneously. Size of controller board: 139mmX58mmX17mm Have a try and you will get great surprise Then, are you going to get this kit? Notes: 1. Please make sure that your LCD is ok before bidding this item, else you will be responsible for the incompatibility. 2. If you concern much about resolution setting, please reconsider before bidding 3. If you are not specialized in electronics or have doubts in operation, please contact us for instruction, as we are not able to responsible for wrong operation. 4. After finishing the connecting, please don&39;t rush to power on First, use multi-meter to test whether the GND of the LCD is connected with the GND of the controller board. If not, please check the connection again. If yes, please test whether there is a short circuit between the red wires and black wires of the LVDS cable. If there is a short circuit, it means opposite connection or other errors. Any problem, please feel free to contact us. DIY needs a certain professional knowledge, please kindly take the responsibility of the risk. No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board. American Friend cryalith&39;s Raspberry PI Computer: Australian Friend beyelka&39;s Project: Successful Example (rossg77 -- an American friend&39;s Project ): Successful Example (radicalboy_fr -- a French friend&39;s Project ): Successful Example (docpot2008 -- a Canadian friend&39;s Project ): Malta Friend drac1977&39;s Project: USA Friend loafer_tingo&39;s Project : Instruction to connect the controller board to the LCD: Package Include: - 1 X LCD Controller Board (M.NT68676.2A) programmed for LM215WF3(SJ)(B1)
- 1 X Inverter
- 1 X 5 keys Keypad
- 1 X LVDS cable
This kit is for lcd LM215WF3(SJ)(B1) , If your lcd is not with the same lcd model number,you may check with us Welcome to customize your own kit |